fluid particle
英 [ˈfluːɪd ˈpɑːtɪkl]
美 [ˈfluːɪd ˈpɑːrtɪkl]
流体质点
双语例句
- Soluble fluid loss particle
可溶性防滤失固体颗粒 - This paper presents a fast cartoon smoke simulation model based on fluid dynamics and particle system.
本文给出一个基于流体物理模型和粒子系统的快速卡通烟雾模型。 - A Theoretical Analysis of the Fluid Circulation Speed Protecting Particle Sedimentation as the Rheological Parameters of Solid-Liquid Suspensions Determined
易沉降悬浮液流变性测定时循环速度的理论分析 - The dynamic test and analysis of the drilling fluid solid particle post-treating unit
钻井液固相颗粒后处理装置的动态测试与分析 - Fluid Simulation for Charged Particle Transport in Capacitively Coupled Dual Radio-frequency Discharges; This paper has investigated the propagation of relativistic electron beams ( REB) in magnetized plasmas.
双频容性耦合等离子体鞘层中带电粒子输运的流体力学模拟本文研究了相对论电子束在磁化等离子体中的传输。 - A numerical simulation approach is given to investigate the characteristics of fluid flow and coal particle flow in different load cases in a tangentially fired furnace.
应用数值模拟方法研究了不同工况下切圆燃烧锅炉炉内的流体流动和颗粒流动特性。 - Effect of curing temperature, curing time, resistance to media, kind and volume of the sand-laden fluid, and particle size of proppant on fibre compound sand control system were discussed.
探讨了固化温度、固化时间、耐介质性、携砂液的种类和用量以及支撑剂粒径等对纤维复合防砂体的影响。 - Studies on Gas-liquid Phase Diagram of Lennard-Jones Fluid via Particle Exchange Molecular Dynamics Simulation
Lennard-Jones流体气液相图的粒子交换分子动力学模拟研究 - Research Advances in the Study of Complex Fluid Flows by Dissipative Particle Dynamics
复杂流体流动的耗散粒子动力学研究进展 - And a new scheme is proposed to accomplish the slip boundary condition on solid wall by imposing a layer of solid particles and peculiar reflection condition at the solid boundary, where the non-physical fluctuation in fluid particle density near the solid wall is effectively eliminated.
提出用固壁粒子层结合流体粒子反弹运动的方法来处理固壁边界有滑移流动边界条件，有效地消除了目前耗散粒子动力学及分子动力学模型在固壁附近的粒子密度波动问题。 - To understand the solid size distribution in drilling fluid, CILAS-920 laser particle size analyzer was introduced.
为了深入了解泥浆固相颗粒大小及级配，并能迅速选择合适的高分子聚合物，引进了CILAS&920型激光粒度仪。 - Based on the quite different responses of the trapped and untrapped particles to external forces, a new useful model, called fluid particle model, is proposed for describing tokamak plasma characterized by the existence of trapped particles.
基于俘获粒子与非俘获粒子对外力作用的响应截然不同，本文提出了一个简单而有效描述托卡马克等离子体响应特征的流体－粒子模型。 - At the same time, the effects of fluid velocity, particle diameter, and bulk particle concentration on the asymptotic fouling resistance were studied.
同时还考察了流体速度，颗粒直径和浓度对渐近污垢热阻的影响。 - Fluid power systems particle contamination monitoring based on matched filter
基于匹配滤波的液压流体颗粒污染度检测 - The Calculation of Flood Flow by Fluid Particle Model
流团模型在洪水计算中的应用 - A model of fluid flow and particle circulation for liquid-solid fluidized bed
液－固流化床的流体流动和颗粒循环模型 - The fluid handling capacity model for a shaker is derived as a function of solids conveyance speed, bit penetration rate, hole size, drilling fluid flow rate, particle size distribution of drilled solids and screen opening size.
在综合考虑固相运移速度、钻速、井眼尺寸、钻井液流量、固相的粒度分布和筛孔面积等参数对处理量影响的基础上，建立了钻井筛处理量的实用计算模型。 - The concept of the fluid particle in porous media is introduced and a new continuum model of fluid in porous media is established in the paper, based on the continuum model of fluid in the fluid mechanics.
在流体力学的流体连续介质模型的基础上，引进渗流体质点的概念，建立了一种新的渗流体连续介质模型。 - Based on the theory of gas sphere endocentric flow, the law of fluid particle motion in porous medium, and the relationship of pseudo pressure between pressure and pressure square, this paper give the function of water shape and time.
基于气体球面向心稳定渗流理论、多孔介质中流体质点运动规律以及拟压力函数，建立了水锥形状与时间的关系模型、水锥突破时间公式及产量公式。 - Based on the mechanical model of the oscillating system of the lance, this paper analyzes the motion of fluid particle and the force applied on it, so as to study the dynamic character of swing oscillating abrasive water jet.
从建立喷枪振动系统的力学模型出发，结合对流体质点的运动及受力的分析，研究了摆振磨料水射流的动力特性。 - The design of fluid particle counter with dual MCU
基于双单片机系统的油液颗粒计数器的设计 - To probe into the effects of the interaction of fluid mechanics and particle dynamics in the process of flame synthesis, the simulation of titania nanoparticle synthesis in the turbulent diffusion flame was performed by using the commercial CFD-code FLUENT.
为了解火焰法合成纳米颗粒过程中流体力学和颗粒动力学作用过程，利用CFD商业软件FLUENT模拟了在湍流扩散火焰中合成TiO2纳米颗粒的过程。 - A parameterized model of fluid flowing particle system has been established by the particle attributes and the model characteristics are defined in detail.
通过将流体的属性参数化，建立了一个参数化的流体粒子系统模型，并对粒子参数特性进行了详细的定义。 - This study adopts a combination of theoretical and experimental methods, as well as the product development and field application, and the main results achieved are as follows: ( 1) It established the relationship of power-law fluid particle settling velocity, sedimentation time and Reynolds number.
研究采用机理研究和室内试验，产品开发与现场应用相结合的方法，取得的主要成果有以下几方面：（1）建立了幂律液颗粒沉降速度，沉降时间和雷诺数的关系式。 - In current research achievement, computer simulations for Chinese painting are mostly based on simulate fluid or particle movement.
纵观目前已有的研究成果，对于国画风格的计算机仿真，多数基于模拟流体或粒子运动方式来实现。 - On account of the density of ferromagnetic particles is much higher than the carrier fluid and the particle size is in the level of micron, the settlement of magnetizable particles is inevitable after a long term of rest.
由于磁性颗粒的密度远高于载液，且粒径属于微米级的范畴，磁性颗粒在长期静置条件下的沉降已经成为无法克服的物理规律。 - Molecular dynamics and NS equations are used to describe the fluid motion in the particle region and the continuous one, respectively.
分子动力学和NS方程分别被用来描述在粒子区域和连续区域内流体的流动状态。 - Jet pump is a kind of fluid machinery and mix reaction equipment with fluid jet as working medium, which transfers energy to suction fluid through turbulent diffusion of fluid particle.
射流泵是以液体射流作为工作介质，通过流体质点或微团的紊动扩散作用，把能量传给被抽流体的一种流体机械及混合反应设备。